- Polypropylene spinning machine
- Polypropylene FDY equipment
- Polyester POY spinning machine
- Polyamide FDY common and high strength equipment
- Polyester FDY equipment
- Polyester high strength equipment
- polyester、Polyamide、 Polypropylene BCF equipment
- Small spinning machine
- All kinds of spinning special parts
- Key Points of Seasonal Maintenance for Polypropylene Spinning Machines
- Weak demand during the off-season has dragged down the prices of chemical fiber raw materials.
- Say goodbye to excessive high temperatures, solve the spinning problems, and get the maintenance guide for the polypropylene spinning equipment from FuBang Chemical Fibers Machinery!
- Thirteen Rows International Exhibition has grandly launched the fourth professional exhibition in the clothing industry.
- The three core sections of the polypropylene spinning machine: extrusion, metering, and winding.
- Contact:Mr. Huang Guofu
- Cel:0086-13901505556
- Fax:0086-519-83341119
- Email:czfb5556@126.com
- Add:No. 288-8 ChangLi Rd, Huangli Town, Changzhou, JS PRV.
1) The card clothing has surface rust phenomenon under the condition of regaining moisture. First, open the fan and run for 2 hours;
2) After spraying the card clothing with rust remover, brush it once with a brush roller, and then lightly coat it with talcum powder; general mechanical parts, coiled beveled channels are wiped with alcohol or warm water;
3) Drive empty car for 4 hours to provide conditions for temperature rise in the workshop; follow-up sliver test is continuously stable within 4 hours to ensure stable quality;
4) Check the electric control box for contact short circuit after being wet;
5) Run slowly and check whether the total air pressure and negative pressure are normal to prevent the CV value from changing;
6) Pay attention to the stable and timely exchange of raw materials during the official resurgence to prevent problems such as large differences;
7) The temperature in the workshop is controlled at 25 ° C, and the relative humidity is controlled at 60%. It is impossible to actively use the return air and spray hot water.
In short, the differential fiber carding machine will stop for a long time, which will cause the card clothing to rust and collect dust. When the machine restarts, there will be a sudden increase in neps, electrostatic entanglement, the bottom of the movable cover will rust, the doffer triangle area will be caught, and the clothing Rust, sliver sliver does not fall, etc., affect production efficiency and quality, take effective measures and correct opening methods to address these problems, can control these problems, and ensure the smooth operation of differentiated fibers.
Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polypropylene spinning machine, polyester industrial silk spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polypropylene spinning Machine, polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machinery, nylon FDY spinning machine, polypropylene spinning machine.
- Weak demand during the off-season has dragged down the prices of chemical fiber raw materi
- Key Points of Seasonal Maintenance for Polypropylene Spinning Machines
- Say goodbye to excessive high temperatures, solve the spinning problems, and get the maint
- Thirteen Rows International Exhibition has grandly launched the fourth professional exhibi
- The three core sections of the polypropylene spinning machine: extrusion, metering, and wi
- The 2026 Middle Class Association Health and Maternal Products Branch Annual Conference an
- A truly efficient polypropylene spinning machine is not judged by its speed, but by its pr
- In the hottest days of summer, our support services remain steadfast | High incidence of s
- The 2026 Wangfujing Forum's Classic and Fashion Sub-forum successfully concluded.
- Polypropylene FDY spinning machine process principle: From melt extrusion to one-time orie