Say goodbye to excessive high temperatures, solve the spinning problems, and get the maintenance guide for the polypropylene spinning equipment from FuBang Chemical Fibers Machinery! 2026/7/31

Due to prolonged high temperatures and humidity, the workshop's heat dissipation pressure has sharply increased, placing the chemical fiber production line under multiple challenges, with equipment stability and process control precision facing significant difficulties. The polypropylene spinning process is particularly sensitive to these environmental changes: polypropylene raw materials have limited temperature resistance, and the spinning processing window is extremely narrow. Rising ambient temperatures amplify melt temperature fluctuations, directly disrupting screw extrusion conditions and the metering stability of spinning pumps, thereby affecting the quality of the primary filament. High-temperature hazards and cumulative heat damage processes, destroying equipment and compromising operations Industry standards clearly specify that the overall ambient temperature in spinning workshops must be maintained below 30°C, with even lower temperatures required in critical areas such as spinning boxes and drawing units. During summer, rising indoor temperatures can combine with the heat generated by equipment heating systems, creating a "cumulative heating" effect that leads to multiple issues: · Process out of control: Melt temperature exceeds the set standard, causing a significant drop in melt viscosity and insufficient filament toughness, leading to a sharp increase in spinning breakage and unstable product quality.  · Equipment overload: Under high-temperature conditions, equipment heat dissipation is hindered, causing core components such as spinning pumps and drawing roller motors to operate continuously under excessive load and high temperatures, making overheating trips and shutdowns highly likely, while also accelerating equipment aging and significantly shortening service life.  · High humidity risks: Moisture corrosion damages machinery and leads to defective products. The workshop should maintain a relative humidity of 50%–60%. After the start of the hot season, air humidity often exceeds 70%, creating a damp environment that harbors numerous production risks:· Equipment rust and jamming: High humidity accelerates oxidation and corrosion of metal components, damaging the precision of critical parts such as cutting blades and guide rollers, leading to operational jams and increased errors.· Frequent product defects: In humid conditions, friction between fibers increases abnormally, making it highly likely for issues like fiber sticking, fraying, or breakage to occur during spinning and cutting processes, resulting in continuously rising scrap rates.· Electrical safety hazards: Moisture entering control cabinets and motor circuits can cause dampness, reduced insulation, short circuits, and tripping. In severe cases, this may lead to equipment failure or safety incidents. Summer Textile Equipment Maintenance Temperature and humidity control is the lifeline of summer production. Once high temperature and humidity spiral out of control, not only does melt viscosity drop and filament breakage become more frequent, but equipment also risks overheating and tripping due to poor heat dissipation, significantly shortening its service life. When humidity exceeds 70%, metal components corrode faster, cutting blade precision and guide roller accuracy deteriorate, inter-fiber friction increases, and problems such as fiber sticking and fraying quickly follow.To safeguard this "lifeline," relying solely on air conditioners running at full capacity is insufficient—instead, a comprehensive approach combining equipment maintenance, process inspection, and environmental isolation is essential:01. Ensure timely heat dissipation—don't let equipment overheat  Under high temperatures, motors and housing units are most prone to overheating. Monitor your equipment as carefully as you would your own body temperature: regularly clean dust from motor cooling fans and ventilation openings, inspect workshop ventilation systems, promptly replace aged filters, and ensure smooth airflow. The spinning box temperature must be monitored daily to maintain temperature fluctuations within acceptable ranges across all zones, preventing reduced melt fluidity and decreased filament strength. 02. Focus on critical processes to prevent breakage  During the hot and humid summer months, the raw material drying system is of utmost importance. It is recommended to install temperature and humidity monitors at the dryer's air inlet to continuously monitor dew point temperature. Clean the dryer’s filter screens and heating tubes weekly, and calibrate temperature sensors monthly to strictly prevent excessive moisture content in raw materials from causing "bubbled yarn" or "fuzzy yarn" defects. At the same time, monitor the temperature of each zone in the spinning box daily to eliminate abnormal fluctuations that could lead to increased yarn breakage. 03. Moisture and Corrosion Protection: Safeguarding Electrical Systems' Health  Summer brings frequent thunderstorms, making electrical components highly susceptible to moisture-induced short circuits. Regularly inspect motor insulation performance and ensure control cabinets are properly sealed against humidity. Frequently wipe metal parts of equipment and apply rust inhibitors when necessary to minimize damage caused by dampness. 04. Staggered Operation: Regular Inspections Are Essential  Temperatures peak at noon, so it's recommended to assign dedicated personnel to conduct inspections every 2–3 hours, focusing particularly on motor temperatures, control cabinets, and spinning zone temperatures, while recording key parameters. High-load processes should be scheduled during cooler morning and evening periods to reduce prolonged equipment stress under high temperatures. If breakage increases or pressure fluctuations occur, document them in detail to enable quick troubleshooting later. Equipment needs cooling, and people need protection from the heat.  A reminder to workshop workers: drinking diluted salt water or mung bean soup is more effective than icy drinks—don't wait until you're thirsty. If you feel dizzy, palpitations, or break out in cold sweat, immediately rest in a well-ventilated, cool place. No matter how hot it gets, never remove your safety helmet or take off your work uniform—the safety line must never be compromised. Although it's hot during the dog days, production can still remain stable and secure with proper maintenance and regular inspections. Fubang Chemical Fiber Machinery has been deeply involved in polypropylene spinning equipment for many years. If you encounter any challenges in equipment maintenance or process adjustments, please feel free to contact the Fubang team at any time—we are ready to provide professional support. Precise temperature control, enhanced inspection, and moisture and corrosion prevention—three measures working together for a smooth summer.Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If any infringement is detected, please notify us immediately and we will delete it.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

Thirteen Rows International Exhibition has grandly launched the fourth professional exhibition in the clothing industry. 2026/7/28

From July 23rd to 26th, 2026, the Shisanxing International Exhibition Center will grandly launch the fourth professional exhibition in the clothing industry - the "Recurrent" 2026 Winter Joint Ordering Conference. The exhibition relies on the mature clothing industry foundation of Guangzhou's Shisanxing, connecting the original supply sources in the south with the terminal markets in the north, and linking the domestic circulation with cross-border trade. It gathers national clothing managers, second-hand wholesalers, chain brand purchasing agents, and cross-border trade practitioners in Guangzhou, simultaneously releasing signals of the domestic autumn-winter clothing consumption market, and officially announcing the overseas layout of the first cross-border fashion expo in Vietnam in December, constructing a new model of "domestic ordering + cross-border export" for commercial trade, and continuously consolidating Guangzhou's position as a global fashion industry trendsetter. As a major annual event for the continuous implementation of the industry, this year's "Recurrent" Winter Joint Ordering Conference is the fourth specialized clothing exhibition created by the Thirteen Rows International Exhibition. After four years of accumulation, the exhibition has transcended its single exhibition and sales platform positioning and has become a core trading hub that radiates the national clothing circulation market. Each ordering conference gathers over a hundred original clothing stores, knitting, women's wear, luxury casual wear and other full-category source suppliers, precisely connecting the purchasing demands of various offline wholesale markets, online live-streaming e-commerce and chain physical stores across the country. It effectively打通s the entire clothing production， wholesale and retail supply chain. The exhibition continuously activates the vitality of the clothing wholesale industry in Guangzhou， drives the coordinated income growth of upstream supporting industries such as fabric supply， logistics warehousing， advertising design and exhibition services， and injects strong momentum into the stable growth of the clothing circulation industry in South China and across the country. It forms a profound guiding force for the domestic clothing circulation market situation， autumn and winter product pricing and industry trend. Currently, Guangzhou is vigorously promoting the "One City, Two Centers, Three Centers" urban brand image, accelerating the brand building, high-end development and internationalization of the fashion consumer goods industry, and jointly creating an international fashion capital. The Thirteen Rows, as the domestic source of clothing purchasing and wholesale, has long held a core position at the forefront of global clothing trends. This year's "Re-awakening" Winter Joint Ordering Conference closely follows the 2026-2027 international fashion trends, concentrating on showcasing winter new products in various scenarios such as knitted textures, retro relaxed styles, new Chinese styles, and daily commuting. It brings together cutting-edge fabrics from home and abroad, innovative weaving techniques and original design patterns. Clothing purchasing and wholesale merchants from various provinces and cities across the country, as well as countries in Southeast Asia, Europe and America, gather at the event site to complete the selection of winter products, batch ordering and supply chain cooperation negotiations in one place. Leveraging Guangzhou's unique advantages of a well-developed industrial cluster and foreign trade ports, the ordering conference also integrates domestic sales and cross-border product selection needs, allowing overseas and domestic merchants to simultaneously capture the global winter clothing trend, further strengthening Guangzhou's unique advantage as a core gathering place for global clothing purchasing and wholesale. Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

The three core sections of the polypropylene spinning machine: extrusion, metering, and winding. 2026/7/28

Among the entire set of polypropylene spinning machines, the melt extrusion system, as the starting point of the process flow, plays a crucial role. (Step 1: Melt Preparation)The core component of the melt extrusion system is the screw extruder, which is responsible for converting the solid polypropylene pellets into a homogeneous melt with good fluidity through heating and mechanical shearing. The design parameters of the screw, such as the length-to-diameter ratio and compression ratio, directly affect the homogenization effect of the melt and the output stability.(Step 2: Metering and Distribution)After the polypropylene melt is output from the screw extruder, it enters the crucial stage that determines the fiber specifications and uniformity - the metering and spinning system. First, the melt enters the spinning box, which, through electric heating or heat medium heating, undertakes the tasks of insulation and melt distribution, ensuring that the melt is uniformly heated before entering the spinneret. Then, the metering pump, which is the core of the system's precision, starts to work. It is responsible for transporting the melt from the spinning box to the spinneret assembly at a stable pressure and precise flow rate. In actual production, the accuracy of the metering pump directly affects whether the fineness of each single filament is uniform. Common configurations include planetary metering pumps, whose transmission device uses a synchronous motor to drive and is controlled by frequency conversion to achieve high-precision metering. Changzhou Fubang Chemical Fiber Machinery Factory pays particular attention to the design of this part when manufacturing equipment such as polypropylene spinning machines、polypropylene FDY spinning machines. (Step 3: Formation and Spinning)Ultimately, the high-temperature molten stream squeezed from the spinneret needs to undergo subsequent processes such as cooling, stretching, and winding before it can become practical polypropylene fibers. These steps collectively determine the physical and mechanical properties of the fibers as well as the quality of the rolled packaging, and are indispensable components of the polypropylene spinning machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The 2026 Middle Class Association Health and Maternal Products Branch Annual Conference and the First Absorption Care and Hygiene Products Conference were successfully held. 2026/7/21

To seek answers for the high-quality development of industries, by innovating to respond to challenges and by collaborating to pool strength, on July 16th, the 2026 China Association of Middle-Class Industries' Health and Maternal Products Branch Annual Conference and the First Absorption Care and Hygiene Products Conference were held in Shanghai. The conference, with the theme of "Innovation · Iteration · Moving Forward", conducted in-depth discussions on core topics such as technological innovation, market expansion, channel construction, and industrial collaboration. Set a clear direction and build consensus In her speech, Li Guimei, the president of the China Industrial Textile Association, pointed out that hygiene and baby care products are important sub-sectors within the industrial textiles industry that possess a sense of people's livelihood and innovative vitality. During the "14th Five-Year Plan" period, the industry has continuously made breakthroughs in areas such as bio-based absorbent materials, ultra-thin cores, fine-denier non-woven fabrics, intelligent products, and functional finishing technologies. The technological innovation in hygiene and baby care products has advanced from single-point breakthroughs to a stage of systematic improvement. Facing the first year of the "15-19" plan, Li Guimei put forward five suggestions:First, adhere to innovation-driven development to shape new advantages in industry development;Second, prioritize quality to create new heights for brand development;Third, adhere to green and low-carbon principles to build a new pattern of sustainable development;Fourth, embrace digital empowerment to cultivate new impetus for industrial upgrading;Fifth, promote coordinated development to forge a new synergy for the common progress of the industry. Yan Huarong, the president of the Health and Maternal Products Branch of the Middle Class Association, the director of the organizing committee of the Absorption Care and Hygiene Products Conference, and the chairman of Jin Sanfa Group & Youquan Co., Ltd., stated in his work report that in the past year, the industry was in a period of population structure transformation and deep adjustment, with overcapacity and market consolidation intertwined. However, through model innovation and technological iteration, enterprises still maintained a generally positive trend. He recalled that since its establishment in 2018, the Health and Maternal Products Branch has always carried out work under the principle of "height, length, and breadth", deeply exploring the full-age hygiene consumption market, and jointly building a multi-level and multi-channel communication platform for industry enterprises, universities, and research institutions. He stated that in the future, the Health and Maternal Products Branch will focus on the refinement and improvement of the two core professional conferences of the year, and create an efficient communication platform. The meeting was chaired by Bai Xiao, the secretary-general of the Health and Maternal Products Branch of the China Producers Association.Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

A truly efficient polypropylene spinning machine is not judged by its speed, but by its precision and stability over a long period of time. 2026/7/21

In the field of polypropylene (PP) spinning, the process adaptability test of equipment is often more meticulous than that of polyester. PP has a lower melting point and is highly sensitive to temperature fluctuations. Issues such as static electricity accumulation and breakage during spinning are also more prominent. Therefore, to determine whether a Polypropylene spinning machine is truly functional, it is not only necessary to consider its short-term operating speed, but also to assess whether it can consistently maintain precise temperature control, stable drawing, and uniform filament during long-term continuous production - this is the core manifestation of the equipment's strength. Currently, the application scope of polypropylene fibers is accelerating its expansion. It is continuously penetrating into high-value-added fields such as automotive interiors and medical supplies from traditional woven belts and carpets. Customers have increasingly strict requirements for indicators such as fiber fineness deviation, dyeing uniformity, and mechanical stability of polypropylene fibers. If equipment suppliers fail to deeply understand the crystallization behavior and thermal history influence of polypropylene fibers, it will be difficult for them to provide effective process support and equipment guarantee during the product upgrade process of customers. The long-term accumulation of Changzhou FuBang Chemical Fiber Machinery Factory in the field of polypropylene continuous equipment is precisely based on these "meticulous efforts". From the optimization design of the screw in the extrusion system (targeted at high-fillage masterbatches and differentiated raw material matching with dedicated compression ratios), to the fluid mechanics simulation optimization of the flow channels in the spinning box body, and then to the precise control of the concentricity and dynamic balance of the drawing roller group, each step strives to help polypropylene customers maintain a stable production state with low breakage rate and high production rate when facing the addition of functional masterbatches or differentiated products such as fine denier and irregular cross-sections. Compared with other types of chemical fibers, the spinning machine for polypropylene fibers has extremely strict requirements for the uniformity of the surface temperature of the heating rollers and the stability of the side-blowing cooling conditions. Even a local temperature difference or fluctuation in wind pressure can directly interfere with the crystallization and orientation process of the fibers, ultimately resulting in color differences during dyeing or a decrease in tensile strength. Therefore, the response speed of the temperature control system and the overall thermal stability of the machine are the key process parameters that determine the consistency of the quality of polypropylene fibers. Selection Suggestions and Summary If you are planning to purchase polypropylene spinning machine, it is recommended to focus on the following aspects during the equipment selection stage:Temperature control performance: Uniformity of surface temperature at each point of the hot rollers (it is recommended to be better than ±1℃), the response speed of the temperature control system's PID regulation, and the thermal stability performance of the entire machine under continuous operation conditions;Special design experience: Does the equipment manufacturer have an independent development history for special polypropylene models, rather than simply making simple modifications on polyester or general equipment;Process adaptability: Whether there are corresponding modular solutions for differentiated requirements such as high-fillage mother mix, fine-diameter yarn, and colored yarn;Long-term operational reliability: The concentricity of the stretching roller group, the constant pressure of the cooling air system, and the anti-interference performance of the electrical control system directly determine the breakage rate and production rate during long-term operation. Typical application fields of Fubon polypropylene spinning machine:Luggage straps, industrial lifting belts, automotive interior fabrics, home textile carpet backing fabrics, medical non-woven fabrics, protective textiles, etc.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

In the hottest days of summer, our support services remain steadfast | High incidence of spinning faults during summer, how to maintain the efficiency of chemical fiber production? 2026/7/15

The best time for health preservation during the three hottest monthsThe cicadas' chirping heats up the three hottest daysThe bamboo shadows shift, bringing a half-hour of leisureA cup of tea quenches the long dayA calm mind brings about a small Jiangnan (a picturesque place) The heat is rising, the hot waves are surging. On July 15th, the official start of the hottest season of the year was marked. The annual high-temperature period officially began. For ordinary people, the hottest days of the year are unavoidable and also a season for cooling off and escaping the heat. But when people think of the hottest days, they usually think of the oppressive and stuffy heat - walking on the road feels like being wrapped in a plastic film, and even the wind carries the heat.In the chemical fiber production workshop, what is even hotter than the weather is the rhythm of the machines' continuous operation and the urgent demands of enterprises to fulfill orders and ensure deliveries. From polypropylene spinning machines to polyester POY spinning machines, the equipment of Changzhou Fu Bang Chemical Fiber Machinery Factory is working together with industry partners to maintain production and efficiency during the hottest days. But the tests of the hottest days actually lie in this "stabilizing" and "holding on". In the summer, the temperature in the workshop is high and the humidity is high. Our polypropylene spinning machines, polypropylene FDY spinning machines, and other equipment are like humans and are also afraid of "heatstroke". During the summer, equipment failures occur frequently, and the maintenance demand also increases sharply. To prevent the high temperature from delaying the production schedule of our customers, we have officially launched the "Triple Heat Special Escort Service", providing all-round support to help everyone produce with peace of mind. As the equipment manufacturer, FuBang Chemical Fiber Machinery also wants to share a few tips on equipment maintenance during hot weather with you:Step 1: Pay attention to "body temperature", ensure smooth heat dissipationDuring summer, equipment motors and enclosures are prone to overheating. Just like people need to wipe off sweat, please make sure to promptly clean the dust accumulated on the motor cooling fans and cooling vents. Check the ventilation equipment in the workshop, replace the filters when necessary, and ensure smooth air circulation. Don't let the equipment get "stuck" due to lack of ventilation. Method 2: Focus on "critical areas" to prevent breakageDuring the hot summer months, the air is humid and hot, so the raw material drying system needs to be closely monitored. Whether it's polypropylene or polyester equipment, the requirements for temperature control accuracy are extremely strict. Everyone should monitor the temperature in each area of the spinning box every day to avoid temperature fluctuations that affect the melt flowability, thereby reducing the number of spinning breaks. Step 3: Prevent moisture and corrosion, and avoid power lines "breaking down"During summer, there are many thunderstorms and the air is very humid. Electrical components are most prone to moisture-induced short circuits. It is recommended to regularly check the insulation performance of motors and ensure that control cabinets are well sealed against moisture. The metal parts of the equipment should also be wiped frequently, and if necessary, apply some anti-rust agents to extend the equipment's lifespan. Deeply engage in the real economy, and through consistent and ordinary efforts, one can achieve lasting success. The manufacturing of chemical fiber machinery is essentially a straightforward business that requires no shortcuts. Throughout the four seasons - spring, summer, autumn, and winter - different production challenges arise in each season: winter requires anti-freezing measures, the rainy season requires moisture prevention, and summer requires heat protection.Hard work yields rewards, and dedication is rewarded by time. In the future, the Changzhou Fu Bang Chemical Fiber Machinery Factory will continue to provide solid products, considerate services, and reliable quality to accompany a wide range of chemical fiber enterprises. It will help them weather the seasons, steadily carry out production, and jointly embrace new developments in the industry! Summer Heat Prevention TipsEquipment needs to dissipate heat, and people also need to protect themselves from the heat. Here's a reminder for the workers in the workshop:· Drink plenty of water: Light salt water and green bean soup are more effective than cold drinks. Don't wait until you are thirsty to drink.· Don't push through: If you feel dizzy, have a weak heart, or break out in a sweat, go to a well-ventilated and shady area to rest immediately.· Stay safe: Even in the hottest weather, don't remove your safety helmet or take off your work clothes. Safety cannot be compromised. Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If any infringement is detected, please notify us immediately and we will delete it.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The 2026 Wangfujing Forum's Classic and Fashion Sub-forum successfully concluded. 2026/7/14

On the afternoon of July 10th, the 2026 Wangfujing Forum - Classic and Fashion Sub-forum concluded successfully in the Golden Hall of Beijing Hotel. The forum brought together designers such as Guo Pei, Zhu Bingren, and Zou You, as well as brand executives and academic experts. It featured several agendas including keynote speeches, roundtable discussions, and cross-border fashion shows. The guests conducted in-depth discussions on the modern transformation of Eastern aesthetics, innovation of intangible cultural heritage fabrics, development of national trends, digital fashion, sustainable fashion, and the creation of fashionable scenarios in commercial districts. The roundtable discussion was themed "Co-creating a New Picture of Fashion Consumption through the Integration of Traditional Culture and Modern Business", exploring the path for the integration of traditional culture and modern commerce. At the event site, the Fashion ESG Social Responsibility Initiative was officially launched, advocating that the fashion industry should practice green, low-carbon and sustainable development. In addition, the "Golden Street Showroom - Zhu Bingren Cross-Industry Fashion Show" was held as a supporting event, achieving the integration of copper melting art and modern fashion creativity. Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

Polypropylene FDY spinning machine process principle: From melt extrusion to one-time orientation crystallization 2026/7/14

The polypropylene FDY spinning machine adopts an integrated one-step spinning and stretching process, which is different from POY (spinning first and then external stretching); the core principle is: PP chip is melted and extruded → cooled to form primary filament → multi-level hot rollers in the machine perform synchronous high-speed stretching + heat setting → directly wind the finished high-oriented long filament. The entire process is continuous without intermediate drop tubes, and the macromolecules complete the orientation crystallization in one go. The finished product has high strength, low boiling water shrinkage, and uniform filament quality. Summary of the Core Process Principles of polypropylene FDY spinning machineMelt spinning basics: Utilizing the thermoplastic property of polypropylene, it undergoes a high-temperature transformation into a flowable melt, which is extruded through small holes to form fine filaments;One-step FDY core mechanism: Spinning and thermal stretching are integrated into one process. Before the initial filament is completely relaxed, it is immediately subjected to thermal stretching. The macromolecules achieve a high degree of orientation and crystallization at once. Compared to the two-step POY + external drawing process, it has lower energy consumption, smaller filament CV value, and more stable shrinkage;Thermal roller temperature control and speed coupling logic: Temperature provides the ability for molecular movement, and the difference in roller speed provides the stretching force. The matching of these two determines the three core physical properties of fibers: strength, elongation, and shrinkage;Cooling and oiling auxiliary mechanism: Uniform cooling ensures the regularity of the filament cross-section; The oil agent eliminates static electricity and improves the friction between the filament and the equipment, which is a prerequisite for stabilizing high-speed drawing. Process Flow (Simplified Main Line)The PP chips are melted and plasticized by the screw at high temperature, then quantitatively transported by the metering pump.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The investment promotion event for the home textile industry zone in Tongzhou District, Nantong City (in Shenzhen) was held in Shenzhen. 2026/7/13

In the midst of the hot summer of July, everything is in full bloom. Gathering in Pengcheng City, we are about to unlock the future. On July 8th, the investment promotion event for the home textile industry belt (Shenzhen) in Tongzhou District, Nantong City was successfully held at the Star World Park in Shenzhen. This event was themed "Home Textiles Soar with Friends 'Peng' by Your Side", and was organized by the People's Government of Chuanjiang Town, Tongzhou District, Nantong City and the Commerce Bureau of Tongzhou District. The Nantong Home Textile Media Group and the Shenzhen Cross-border E-commerce Association served as co-organizers. Over a hundred high-quality cross-border e-commerce service providers and sellers from Shenzhen attended the event, deeply understanding the home textile industry in Chuanjiang Town and discussing strategies for overseas development together. Unite and set sail, jointly explore the blue ocean. Party Committee Member and Secretary of the Communist Party of China Cuanjiang Town Committee, Sun Kang, attended the event and delivered a speech. He stated that Cuanjiang Town, as the main base of Nantong's home textile industry, has the largest production and sales base of home textile products in China and even globally. It has a solid industrial foundation and a complete supporting system. Currently, it is focusing on building a "global top-level home textile supply chain + mature distribution capabilities in Shenzhen" two-way channel, achieving resource complementarity and advantage accumulation. He warmly invited all entrepreneurs to visit Nantong, settle in Tongzhou, and deeply develop Cuanjiang, to jointly create a new pattern of high-quality development of the home textile industry. Zhou Jun, the executive president of the Shenzhen Cross-border E-commerce Association, expressed great expectations for the future of industrial cooperation between the two regions in his speech. As a leading hub for cross-border e-commerce, Shenzhen boasts a mature market channel, operational experience and digital capabilities. It forms a strong complementarity with the Tongzhou Textile Industry Belt in Nantong. The cooperation between the two regions has broad prospects and unlimited potential. Precise promotion, highlighting the industrial strength Liu Liang, the deputy secretary of the Communist Party Committee of Chuanjiang Town and the candidate for the town's mayor, gave a special presentation. Focusing on the three core advantages of "occupying a golden transportation hub, gathering a hundred-billion potential energy, and creating a first-class ecological environment", he systematically explained the geographical location advantages, industrial development positioning and business environment support system of Chuanjiang Town. He comprehensively showcased the hard-core competitiveness of the Tongzhou Home Textile Industry Cluster. At the same time, he highlighted three mature carriers: the Digital Printing Industrial Park land, the Rong Chuan Jin Gu Urban Industrial Complex, and the Xian Yi Fang Creative Industrial Park. These carriers are fully open for cooperation to high-quality projects, aiming to host first-class industries with first-class carriers, and laying a solid foundation for the cross-border home textile industry's cluster development. In-depth dialogue, jointly discussing a new chapter of development During the speech segment, industry experts took turns to share their insights and provided precise guidance. Shen Jiandong, the deputy general manager of Xianyi Fang and a partner of Qianli Yanshang Chain, introduced the core business segments of Qianli Yanshang Chain, which are dedicated to empowering the home textile industry cluster and global sellers, enabling the world to use Chinese high-quality home textiles. Si Xiaofeng, the Party Secretary and Chairman of Nantong Rongda Holding Group Co., Ltd., provided a detailed explanation of the park's supporting facilities,入驻 policies， and ecological services， offering comprehensive support for enterprises to establish themselves in Nantong and deeply engage in the cross-border home textile sector. Yang Yongcheng， the founder of Nantong Qianli Cross-border E-commerce Co.， Ltd.， shared his experience of settling in Chuanjiang and praised the efficient and convenient "Chuanjiang speed"， expressing the hope that more Shenzhen sellers will recognize the value of Chuanjiang and sell Chinese home textiles all over the world. Xu Yancheng， the president of Nantong Cross-border E-commerce Chamber of Commerce and the founder of Niu Sai Network， shared the opportunities for cross-border home textile exports and guided enterprises on how to empower their overseas expansion. This promotional event achieved remarkable results, with numerous cooperation agreements signed on the spot, injecting strong impetus into the coordinated development of industries in the two regions.Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

More stable, smoother, and more convenient – The efficient production method of polypropylene FDY spinning machine 2026/7/13

In the production of polypropylene filament, if the equipment does not match the production conditions, it may lead to unstable filament quality, cumbersome machine adjustment, and limited production capacity. The polypropylene FDY spinning machine of Changzhou Fubon Chemical Fiber Machinery Factory is designed based on the production pain points at the front line. It can adapt to the mainstream production conditions in the industry and cover various types of chemical fiber production enterprises of large, medium, and small scales. I. Standardized Mass Production Scenario for Civilian Textile FibersThis equipment is designed for the civilian light industry sectors such as decorative fabrics, home textiles, luggage straps, and automotive interiors. It is suitable for the production of conventional fine-diameter and medium-diameter polypropylene fibers. The entire process is mature, integrating spinning, drawing, and setting. The produced fiber strands have high flatness and good consistency, effectively reducing the breakage rate in subsequent weaving processes. Additionally, the equipment supports flexible machine adjustment and can quickly switch to conventional production specifications, meeting the production needs of small and medium-sized factories for small batches and multiple batches. II. Stable Production Scenario for Industrial Functional FibersFor industrial fields such as geotechnical materials, safety rope nets, industrial filter cloths, and lifting belts, the equipment can be adapted for the production of high-strength polypropylene FDY fibers. Relying on a stable melt conveying system and precise stretching control, the produced fibers have excellent toughness and strong corrosion resistance, meeting the requirements of industrial products for wear resistance and resistance to acids and alkalis. The equipment structure is stable and can support long-term continuous operation, meeting the production needs for large-scale industrial fibers. Recommendation: For the main production of civilian home textiles and decorative fabrics, a conventional general-purpose polypropylene FDY spinning machine can be selected; for in-depth research in industrial geotextiles, protective products or filtration materials fields, a high-strength filament compatible model can be chosen. Our company can customize a complete set of spinning equipment solution based on the customer's product category and production site.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

An excellent manager leading a team must always keep this golden rule in mind: Start tight and then loosen up, and the process will become smoother and smoother! 2026/7/3

Excellent managers understand one principle: only by managing just right can a team maintain both order and vitality. Management is neither about being overly strict nor excessively lenient; it's an art of finding the right balance. True mature management means maintaining warmth above the baseline, preserving flexibility within boundaries, and embracing vision in people's hearts.The essence of management has never been control, but rather inspiration. When every employee can proactively take responsibility and fully unleash creativity in an environment of trust, respect, and empowerment, the team's strength becomes unstoppable. The Three Levels of Management The first level is managing people through individuals. At this stage, managers act like overseers, and efficiency depends entirely on personal supervision—its limitations are obvious. Yet this is often the inevitable starting point for many managers.The second level is managing people through systems. Processes, rules, and performance evaluation systems are established, providing clear guidelines for everything. Team operations gain basic stability, and both efficiency and fairness improve significantly. This represents a major leap forward from the first level.The third level is managing people through culture—the highest realm of management. When values and principles become internalized as self-awareness, employees know what to do without being reminded, and take responsibility without needing to be urged. Managers can then step back and focus on strategy and growth.The brilliance of the third level lies in employees not feeling managed at all. Management ceases to be top-down control; instead, it becomes an internalized, self-sustaining order. Everyone does the right thing not because of rules, but because of shared understanding. This is the power of culture.From rule by individuals to rule by systems, and finally to rule by shared values—each step represents a significant advancement. Every manager can continuously strive toward reaching the third level. Management principle: Start strict, then ease up—over time, things will run more smoothly. Management has a time-tested golden rule: start tight, then loosen up—over time, things will run more smoothly.  In the early stages of team building, members assess a leader's credibility and integrity based on how consistently they enforce rules, which determines whether future management will go smoothly.  If you clearly establish standards and explain expectations from the outset, firmly demand what needs to be done, and diligently follow up where necessary, team members will quickly develop a clear understanding and a stable rhythm. Once this order is established and professional trust begins to build, you can gradually delegate authority and allow flexibility. Employees will then feel trusted and appreciated, naturally motivating them to strive for even greater performance.  Starting tight builds authority and sets boundaries; loosening up later conveys trust and appreciation. This sequence makes the path of management ever broader.  Conversely, if you're overly lenient at first and try to tighten controls later, you'll achieve far less with much more effort. That’s why wise managers understand that initial strictness is precisely what creates the space for greater trust and eventual empowerment down the road. Flexible and Adaptive: Maturing Through Dynamic Adjustment Managing a thriving organization isn't about clinging to a single style, but rather skillfully shifting between "looseness" and "tightness." This requires managers to possess sharp insight and flexible adaptability.The right management approach varies from person to person and from moment to moment. Experienced, self-driven long-term employees deserve ample space to thrive; newcomers or those still growing need more guidance and support to help them gain footing and build confidence. A good manager is like a gardener—offering tailored care for each plant so that every one flourishes.Pacing must also adjust with the situation. During critical project phases or final pushes, management naturally tightens, focusing energy and uniting efforts. In stable periods or times of exploration and innovation, it's better to loosen up, encouraging open dialogue and sparking creativity. Wise managers understand how to read the environment and fine-tune their team’s rhythm by skillfully balancing tension and ease.Above all, consistent, honest, and transparent communication is essential. Why are we blocking this step? Why are you being granted this authority? When the reasoning behind every decision is clearly shared, employees feel valued and respected—not just subjected to arbitrary orders. This mutual understanding forms the strongest foundation for seamless transitions between flexibility and structure.Ultimately, the goal of management isn’t control—it’s inspiration. Tightness builds the framework of the stage; looseness allows everyone to dance freely upon it. When a manager finds the perfect balance between these two, they cultivate not only a high-performing team but one filled with joy and purpose. The content and templates in this article are compiled from the internet. Copyright belongs to the original authors. If there is any infringement, please notify us promptly for removal.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

Polypropylene spinning machine, how to balance temperature, raw materials and operation maintenance? 2026/6/30

When many purchasing clients inquire about Polypropylene spinning machines, they often get confused about the equipment's stability, production costs, and compatibility with raw materials. The Changzhou Fubang Chemical Fiber Machinery Factory, based on its years of supporting experience, has compiled several objective answers to address these concerns. 1. Temperature and Pressure: Uniformity is the foundation of product consistency. Polypropylene has strong melt fluidity and a narrow spinning window. If there are temperature differences or pressure fluctuations in the equipment, the filament bundle will directly show uneven fineness and an increase in breakage rate.In our solution, the spinning box has optimized the melt flow path layout, adopted uniform heating design, and combined with a balanced side-blowing cooling structure to ensure that the melt residence time and temperature at each spinning position are basically consistent. The metering pump is closely integrated with the spinning component to reduce pressure pulsation. Customer feedback is relatively concentrated: after the equipment has been running for a period of time, the temperature deviations at each part are still controllable, and the consistency of the finished products between batches is stable. Meanwhile, the entire machine frame is made thicker and reinforced. The temperature control of the stretching hot rollers is evenly distributed. The adjustment range of the winding tension is wide. It operates smoothly under long-term continuous operation conditions, reducing the interference to the quality of the filament bundle caused by mechanical resonance. 2. Compatible with various raw materials, with reduced maintenance burden in the long term. Whether the equipment is user-friendly also depends on what raw materials it can process. Our model supports the processing of regular polypropylene chips and various modified functional polypropylene raw materials. It can be adapted for both small-batch samples and large-scale mass production, with high flexibility for transfer production.In addition, the core wear-prone parts are designed in a standardized manner, making it convenient to purchase replacement parts. The equipment maintenance does not require complex tools, and ordinary operators in the workshop can independently complete basic maintenance, reducing the reliance on on-site support from the manufacturer. After optimizing the design for thermal energy utilization, the continuous production energy consumption shows stable performance, which is conducive to the factory's control of long-term production expenses. Selection SuggestionsIf you are evaluating Polypropylene spinning machines, it is recommended to focus your assessment on thermal stability and component consistency - whether the process parameters can remain stable during long-term operation of the equipment, as this directly determines the daily yield rate of qualified products. FuBang Chemical Machinery Factory has always believed that the value of the equipment ultimately lies in the smoothness of daily operation and the convenience of maintenance. We are willing to use solid manufacturing details to help you make polypropylene spinning more worry-free and controllable.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The 10th Textile Intangible Cultural Heritage Conference and the 23rd China (Dalong) Dongguan Conference were held. 2026/6/30

In June, in Dalang, the lychees are in full bloom, and the looms are humming across the land. This internationally renowned modern wool textile industrial cluster is welcoming a grand industry event with the most passionate Lingnan style, centered around a thousand-year-old intangible cultural heritage and based on the wool weaving industry. On June 24th, the 10th Textile Intangible Cultural Heritage Conference, the 23rd China (Dalong) Wool Textile Products Trade Fair, and the 95th International Wool Textile Conference were launched simultaneously in Dalong, Dongguan. The 10th Textile Intangible Cultural Heritage Conference was jointly hosted by the China Textile Industry Federation and the Dalong Town Government. With the theme of "Intangible Cultural Heritage Coexistence and Textile Innovation for the Future", representatives from relevant government departments, industry associations, textile intangible cultural heritage practitioners, textile and apparel enterprises, and university research institutions gathered together to jointly explore new paths for the integration and development of textile intangible cultural heritage and the wool textile industry, injecting cultural momentum into the construction of a modern textile industrial system. Technology enables industries to move faster, while culture enables them to go further. At the opening ceremony, Director Dong Tie of Dalang Town's Party Committee delivered a speech, stating that the 10th Textile Intangible Heritage Conference, with the theme of "Intangible Heritage Coexistence - Weaving the Future", actively explores the innovative path of "intangible heritage culture + traditional industry" for mutual empowerment, allowing ancient dyeing and finishing techniques and meticulous handcrafted embroidery to add cultural depth and fashion brilliance to wool textile products, and creating a series of "wearable cultural assets". Note: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify promptly and contact for deletion.......

Disrupting traditional fashion + Shining at the World Cup: China's textile flexible customization and the event's strong capabilities! 2026/6/26

Natural, breathable and environmentally friendly linen fabric, combined with the diverse aesthetics of digital printing, is becoming the core growth point of summer fabric in the 2026 Textile City. The linen material section of the Textile City gathers hundreds of merchants. Categories such as pure linen printing, Tencel linen printing, hemp digital printing, and ramie retro printing are selling well both domestically and internationally. The diverse styles are suitable for various purchasing channels, and printed linen has become the mainstream fabric in the market. The market is booming and in high demand. Printed cotton has seen a two-way increase in both domestic and export sales. Market merchants generally reported that the orders for printed cotton fabric have increased year-on-year this year, and the market trend is continuing to rise. Two major consumption trends have driven the demand. The first is that the trend of traditional Chinese clothing styles and a relaxed sense of dressing has remained popular, and the printed cotton fabric with natural texture is suitable for dresses, shirts, and wide-leg pants. The second is the global sustainable fashion wave. The properties of the cotton fiber, such as degradability, antibacterial, and breathable, align with the environmental procurement standards of Europe, America, and Southeast Asia, and the export proportion of digital printed cotton fabric has been increasing year by year. Three New Development Trends of Printed Hemp FabricsBy visiting the market and enterprises in Qiaoqiao, it was found that printed hemp fabrics are showing three major transformation trends.1. Blending improvement has become the mainstream. Blending fabrics such as Tencel hemp and copper-ammonia hemp have improved the drawbacks of pure hemp, such as hardness and easy wrinkling, while also offering multiple advantages for wearing. They have higher premiums.2. Digital printing is becoming widespread, replacing traditional screen printing to achieve rapid response for small orders. Original and exclusive patterns have become the core competitiveness, and low-priced copied goods are gradually being eliminated from the high-end market.3. Production has been fully greenized. Eco-friendly dyes and water-saving processes have been popularized. Environmental certification is a must for exports, and green fabric export orders continue to grow. Overturning traditional dressing styles, personalized digitalization has become a new trend. Currently, the pace of innovation in the consumer market is accelerating continuously. The digital-native core groups, Generation Z and Alpha Generation, have become the main consumers in the footwear and accessories industry. These two young generations have broken the traditional consumption logic of clothing and have not been limited to the basic practical functions of products. They focus on personalized expression, digital experience, comfort texture, green sustainability, and diversity and inclusiveness as the core consumption demands, completely reshaping the industry's development pattern and forcing major brands to transform and upgrade, opening up a new competitive era in the footwear and accessories sector. The trend of personalized customization is sweeping the market and has become a core necessity for the consumption of young people. Tired of the uniform mass-produced styles, the Z Generation and the Alpha Generation are extremely eager for unique clothing styles, which has driven the continuous popularity of customizable sports shoes and personalized accessory customization services. From the color matching of the shoe surface, the combination of materials, the engraving of logos, to the self-selection of the style of shoelaces and details of accessories, the all-round personalized customization model precisely meets the dressing needs of young people who "reject similar styles and seek uniqueness". The atmosphere of this World Cup was created by Chinese fabrics.China's textile industry was able to dominate 70% of the global World Cup textile-related products. The core of this success lies in the unique and complete domestic textile industry chain. From the upstream chemical fiber raw materials, functional base fabrics, printing and dyeing, to the midstream clothing cutting, fabric product processing, and the downstream cross-border logistics, overseas one-stop sales, and compliant event IP outsourcing services, the three major textile industrial belts in Zhejiang, Fujian, and Guangdong seamlessly connect. Without relying on any overseas supporting links, it can quickly respond to the massive urgent orders from all over the world. Wherever the World Cup goes, the orders for Chinese textiles will follow? In response to the pain points of this joint event organized by the United States, Canada and Mexico, as well as the dispersion of overseas logistics and the differences in product compliance standards, the domestic industrial clusters have also made targeted preparations in advance. In addition to consumer-grade textiles for ordinary fans, professional sports-related textile products at the stadium have also achieved full coverage of domestic products. Stadium anti-slip carpets, player substitute bench heat-insulating fabric, spectator stands dust-proof and flame-retardant curtains, referee-specific functional uniform fabric, and VAR equipment protective textile covers, all of which are industrial-level and event-specific textiles, are all supplied by leading domestic textile enterprises. On the football field, players from various countries strive to compete for glory. Beyond the stadium, China's textile industry, with its robust production capacity, cutting-edge manufacturing, and complete industrial chain, quietly takes on the atmosphere of the entire World Cup. From the eye-catching trendy fabric accessories at the opening ceremony, to the ubiquitous fan support fabrics in the streets and alleys, and to the indispensable professional textile support behind the scenes of the stadium, without any grand promotion, Chinese manufacturing has rooted itself in every corner of the world's top sports events in an imperceptible way. The content and template of this article are collected from the Internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......