Fubon polypropylene spinning machine main technical parameters:

The number of parts of the polypropylene spinning machine: 1, 2, 4

Polypropylene spinning machine spinning position: 1200~2000mm

Number of spinning heads per filament spinning machine: 2, 4, 6, 8

Polypropylene spinning machine finished silk fineness: 180D~2100D

Polypropylene spinning machine screw diameter: Φ30mm~Φ120mm

Polypropylene spinning machine drafting roller size: Φ190×330mm or Φ180×280mm

Polypropylene spinning machine winding speed: 1500~3000m/min

Polypropylene spinning machine for winding machine: A435 or A635 or A835

Main features of polypropylene spinning machine:

Using long screw extruder, AC frequency control

New spinning box machine and mixed homogeneous melt line

Large-plate spinneret with self-sealing assembly on round or rectangular

Accurate planetary gear pump and lifting position quick release drive rod

Uniform stable side blowing device, large flow spray oiling system

Adopt environmentally friendly energy-saving medium electric heating system, imported intelligent instrument control

3~5 pairs of drafting rolls for drafting and heat setting, new terminal network device

Adopt domestic automatic switch winder

Adding a side-by-side switching filter to produce a strong filament from recycled raw materials

High-strength wire strength warranty above 7 g / denier

Fubon polypropylene spinning machine adopts screw extruder with suitable polypropylene fiber. It is equipped with continuous large-area melt filter, hot-medium electric heating spinning box, round or top-loading rectangular spinning assembly, uniform side blowing. And oiling system, localized single-zone hot roller and domestic automatic switching winder.