As the twenty-four solar terms progress, the temperature, humidity, and wind pressure around the workshop are gradually changing. The production of polypropylene filament has a strong correlation with the environmental conditions. The entire process of polypropylene spinning machine, from screw feeding, melt plasticization and extrusion, to side blowing cooling, drawing and setting, and winding and collecting, is closely linked. Changes in environmental conditions will indirectly affect the melt fluidity, cooling rate of the filament, and thereby influence the fineness, strength, and appearance stability of the polypropylene filament. The operating load of each component of the equipment will also change accordingly.

During the transition of solar terms, many spinning workshops often encounter minor problems: in the hot summer, the cooling wind load increases, the oil temperature and box heat dissipation pressure rise, and long-term continuous operation can accelerate the aging of sealing parts and make dust more likely to adhere to the air ducts and air channels. After autumn, the temperature difference between day and night widens, and the temperature difference between the workshop during the day and at night is obvious. The metal parts of the pipelines and machines will undergo slight thermal expansion and contraction, and if the lubrication plan is not promptly updated, the noise and wear risks in the transmission bearings and gears will increase. During the rainy season and periods of continuous rainy weather, the air humidity is high, and the electrical control cabinets and terminal blocks are prone to condensation and moisture, bringing electrical safety hazards. In the dry and cold winter, the static electricity problem becomes prominent, the filament bundles are prone to flying and sticking together, and at the same time, the compensation parameters of the heating and temperature control system need to be reasonably adjusted to ensure the stability of the melt temperature. 

The stability of the equipment has never been solely dependent on the quality of the equipment itself. Daily operation and maintenance adjustments in accordance with the seasonal changes are an important part of maintaining stable production. By combining the environmental changes brought about by the solar terms, sorting out the corresponding maintenance priorities, enterprises can reduce unplanned downtime: during the hot season, regularly clean the filter of the cooling air duct, inspect the circulating oil circuit, and ensure ventilation and heat dissipation in the workshop; in seasons with significant temperature differences between day and night, adjust the lubricating oil brand and injection cycle, and tighten easily loose connection parts; in humid weather, implement dehumidification and dust-proof sealing checks for the electrical control cabinets; in the dry and cold winter, optimize the humidity ratio of the side blowing air, calibrate the temperature control parameters in each section, and establish a regular and seasonal equipment inspection habit for the workshop operators.

We focus on the research and manufacturing of polypropylene spinning machines. Over the years of supporting downstream chemical fiber customers, we have continuously collected on-site operation feedback under different regions, seasons, and solar terms. In addition to providing maturely structured and suitable polypropylene filament spinning equipment for long-term continuous production, we will also share the adjustment ideas and maintenance lists that are in line with the changes in solar terms, in order to assist workshop operators in establishing a regular and seasonal equipment inspection habit. 

The production in four seasons has a rhythm, and equipment maintenance has rules. Adapting to the changes of solar terms, integrating equipment inspection, maintenance, and parameter fine-tuning into daily production management can weaken the interference of climate fluctuations on the spinning process, stabilize the quality of polypropylene fiber products, and help chemical fiber factories carry out production work smoothly and orderly.

Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.

Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.