Composition and main parameters of polypropylene spinning machine!

Main technical parameters of polypropylene spinning machine

Number of polypropylene machine parts: 1, 2, 4

Polypropylene Puqiang FDY mechanical spinning pitch: 1200 ~ 2000mm

Spinning heads per polypropylene FDY machine: 2, 4, 6, 8

Polypropylene Puqiang FDY mechanical finished silk fineness: 180D ~ 2100D

Polypropylene ordinary strong FDY mechanical screw diameter: Φ30mm ~ Φ120mm

Polypropylene Puqiang FDY mechanical drafting roller size: Φ190 × 330mm or Φ180 × 280mm

Polypropylene general strong FDY mechanical winding speed: 1500 ~ 3000m / min

Polypropylene Puqiang FDY machinery suitable winding machine: A435 or A635 or A835

Main features of polypropylene spinning machine:

Using extended screw extruder, AC variable frequency speed regulation

Adopt new spinning box machine and mixed uniform melt pipeline

Large plate spinneret with self-sealing components on round or rectangular top

Adopting accurate metering planetary gear pump and lifting position to extend the quick release drive rod

Adopt uniform and stable side blowing device, large flow spray oiling system

Adopt environmental protection and energy-saving medium electric heating system, imported intelligent instrument control

Drafting and heat setting of 3 to 5 drafting rollers, a new type of final network device

Using domestic fully automatic switching winding machine

Add continuous switching filter to produce ordinary strong filament from recycled raw materials

High-strength wire strength warranty above 7 g / denier

The Fubon polypropylene spinning machine uses a suitable screw extruder for spinning polypropylene. It is equipped with a continuous large-area melt filter, a spinning box electrically heated by heat medium, and a round or upper rectangular spinning component, with uniform side blowing. And oiling system, domestic single-zone hot rolls and domestic fully automatic switching winding machine.