Recently, the Joint Equipment Department of the Textiles and Stocks Co., Ltd. has standardized the management of spinning components, and detailed and specific regulations have been made from the aspects of special machines, special parts, and storage methods, and further standardized the management of spinning components.

Some spinning parts are idle because of the change of the variety or the rotation of the car. Due to the environmental factors of the workshop, if the spinning parts are deactivated for a long time, the life of the components will be reduced, and it is necessary to disassemble and protect them in time. Therefore, the disassembly method and storage method are particularly important. Through the on-site inspection, the Textile and Enterprise Management Department found that the management of spinning components in various units was uneven, and there was no standard for standardization.

In response to this situation, the Ministry of Enterprise and Management jointly regulates the spinning components. First, identify the pilot units and formulate specific rectification methods according to the types of special items. Secondly, it will be promoted throughout the company in accordance with the standardized model, and will be checked and compared and rectified. Finally, closed-loop management and normal management are formed. The specific rectification method takes the steel collar as an example. First, the production unit decides whether to replace the steel collar according to the production status and production index. Before the steel collar expires, if the index and production status are good, it should be extended. Second, the expired steel collar should be downgraded, and the steel knitting machine's steel collar is deployed to the self-use yarn machine to continue to use, extending the life of the special parts. Third, the old steel collars replaced by the replacement of varieties and other reasons should be placed according to the platform, positioned and stored, and managed by others. The vehicles can be used in time according to the remaining period to avoid affecting the quality of reuse after long-term storage. The fourth is to choose a relatively cost-effective steel collar. At the same time, all production units are required to plan on the distribution of maintenance costs and use the money on the cutting edge. The money must not be saved, and it should be supervised.

Through the specification management of spinning parts, the equipment management of each branch is more standardized, the equipment maintenance cost is more accurate and more reasonable, the life of the parts is prolonged, the equipment maintenance cost is reduced, and the equipment is continuously maintained in high efficiency.

Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polypropylene spinning machine, polyester industrial silk spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polypropylene spinning Machine, polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machinery, nylon FDY spinning machine, polypropylene spinning machine.