Polypropylene spinning machine companies want to retain the hearts of employees, the secret lies in ..... 2018/10/31

Many CEOs often complain that employees are not loyal to the company, but rarely think about why employees are not loyal, because loyalty is always two-sided, reflecting the state of cooperation between the boss and the employee.Employees' loyalty to the company is gradually established in the process of cooperation and development between employees and enterprises, rather than in one go. This kind of loyalty is not required or stipulated by the enterprise, but is gradually generated on the basis of mutual loyalty. of.To a certain extent, corporate loyalty should be done in the front. Enterprises use their loyal and specific behaviors to win employees' loyalty to the company. This is the real connotation of improving employee loyalty.Where does employee loyalty come from? This is a big problem, and Xiaobian summarizes the following points:First, respect from the enterpriseTo a certain extent, enterprises and employees are equal cooperative relations, employees respect enterprises, and enterprises must respect employees. This is the basic requirement of modern enterprise management.If a company respects its employees and always regards employees as the most valuable asset of the company, then employees must be grateful to the company; otherwise, if a company despise employees, it only regards employees as a tool for making money, and it is “disappearing to employees”. Employees, then employees will never have loyalty.Second, trust from the enterpriseTrust is the basic condition for employees to establish cooperation with enterprises, and it is also the basis for improving employee loyalty to enterprises. Lost trust, between employees and enterprises can only be regarded as a deviance, and even can not come together to cooperate.This kind of trust is not only reflected in the old employees, but also in the new employees. Even the employees during the trial period should also give basic trust. This kind of trust often affects the loyalty of individual employees and corporate teams.Third, from the care of the companyEmployees and enterprises are not naked interests, but should have more colorful content, such as the company's care, support, and help to employees as always, which will make employees feel grateful. From the support of work, the care of life to the help of the family, and sometimes the humanized treatment of employees' mistakes or faults, these subtle cares can capture the "loyalty" of employees.Fourth, the reputation from the enterpriseThe reputation of the company is very important to the employees. A good reputation will make the employees believe in the company, rely on the company, and dedication to the company.When it comes to credibility, the minimum is to talk about integrity, to be a promise, to say that to do it, we must first honor the treatment of employees, in the absence of violations, we must not arbitrarily deduct the treatment of employees. Occasional financial difficulties are in arrears, and they must be open and honest, communicate fully with employees, win the understanding of employees, and explain the exact redemption time.As for the credibility, it is also very important that the company evaluates in the industry and society. These are all about the employee's recognition or loyalty to the company.V. Reuse from the enterpriseEvery employee wants to be a "person" in the company. They are always eager to do their best and make the best use of their talents. They always want to make a difference and make a difference in the enterprise through their own efforts.Probably every employee wants to be fully recognized by the company. They hope that they will be assigned to the right departments and positions in order to develop their expertise and talents, and hope that they will be appreciated and valued by the company and the president.In the enterprise, when employees are reused, they will be grateful and will be loyal to their duties and loyal to the company.Sixth, the treatment from the enterpriseThe generous treatment is a magnet for attracting employees, and it is also a prerequisite for employees to settle down.These treatments include basic wages, rewards, commissions, subsidies, shares, housing supplements, car repairs, insurance, benefits, etc., and the generous treatment can make the employees "both come, then peace of mind" and put all their energy into their work. With no worries, be proactive, and realize your potential, you will do your best to do your job with one heart and one mind.Seven, the charm from the bossAttractive CEOs are always able to unite employees, improve morale, lead employees to attack the city, win the enemy, and build merits and achievements in the fierce market competition.Attractive CEOs will make employees feel motivated, hopeful, and motivated by employees, even if they are faced with difficulties, because employees believe that difficulties are only temporary, and CEOs must have ways to lead employees to overcome difficulties and seize victory!Employees always fear the charismatic CEOs, and they will also be loyal to the companies led by the bosses.Eight, understanding from the enterpriseThe death of a confidant is also true in a company. If a company can truly understand employees and understand what employees think, say, do, and need, they must understand the difficulties and difficulties faced by employees. Communicate, then coordinate or help employees solve confusion, then employees will regard the company as a "confidant."In particular, companies must not devalue their employees when they “fail”. Instead, they must work hard to help employees analyze the gains and losses, find out the reasons, encourage employee morale, and make employees move out of their difficulties. success. The company understands the employees and truly understands the employees' hearts. The employees will naturally be loyal to the company.to sum upLoyalty is the traditional virtue of our Chinese nation. Since ancient times, there has been a saying of "heart-to-heart" between people, and so is the current enterprise. If the company treats its employees with sincerity, employees will definitely use loyalty. The heart is to return the business.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

To improve the profitability of the textile machinery industry, we must avoid these six traps! 2018/10/29

1. Pursue performance growth and ignore profit growthSome companies are often very concerned about how many scales, how much capacity, how much sales, but when they understand the core issue of profit, they have shook their heads again and again, and even 3% of profits have not even reached the edge of losses.However, there are some enterprises in China, holding the infinite pursuit of sales, and slamming advertising investment, the result of the capital chain has been interrupted, and it has died down. This kind of sales, which only look at the rising sales, do not pay attention to profits, and often do a lot of things, but in the end they crash down...2, the lack of services, take away profitsThe quality service of many companies is just a scorpion. Once they call to find the service personnel, they immediately reply unclear and don't know. This matter has nothing to do with me, especially in the machinery industry.Some enterprises may lack the corresponding training and supervision. Some employees even think that doing service work is a low-level job. This kind of mentality and concept leads to a large number of customers losing service due to poor service, and the decline in sales and profits. It becomes inevitable.3, employees perfunctory things, eat off profitsSome employees have developed a style of muddy, and they have nothing to do with suspicion. The dealers call to replenish the goods. No one is in charge. The salesmen of the investment are not willing to go out to run the business because many of the newspaper’s accommodation travel expenses. Delayed reporting, although the company is in the industry, for this reason, a large number of dealers are lost.However, such management is not good, and the losses caused by internal consumption will affect the market and partners, and the impact will hinder the healthy development of the company.4, product defects, give up profitsMany enterprise products are of good quality, but they ignore some easy-to-detect details. For the machinery industry, because of the details, the repurchase rate is reduced, causing trouble for the purchaser, and the losses are completely avoidable.5, arbitrarily launch a price war, burn off profitsMarket economy launching price war is a common business practice, but many companies have turned tactical behavior into daily behavior, long-term advertising bombing, price diving, so continue the above behavior, driving sales, the company has fallen into such a kind The circle of vicious circle can't extricate itself. Every time I see the high sales expenses of the financial statements, and the less and less profits, even the losses are at a loss.6, inventory backlog, swallowing profitsMany companies have good sales and profit conditions, but because the products have obvious off-season seasons, they bring a lot of inventory, and the indigestible stocks take up a lot of money and cannot be put into re-production.This kind of profit is actually just on the books. In order to digest the stock, it is cheap to sell at any cost. Even so, there is still a lot of backlog inventory that cannot be digested. Whether the production and demand, the product itself is marketable, affects the profitability of the company.All these kinds of enterprises, the profits of enterprises are getting less and less, and the coming of the off-season is even worse, and enterprises are facing unprecedented tests and sufferings. The core of the enterprise is profit, and the pursuit of others is the end of the market. How to improve profitability is the core issue we should think about.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

Shanghai International Textile Machinery Exhibition focuses on innovation 2018/10/24

People Online Haihu October 22 (Reporter Shen Wenmin) Recently, 2018 Asia International Textile Machinery Exhibition and Shanghai International Textile Machinery Exhibition were held at the National Convention and Exhibition Center. The exhibition is a large-scale event focusing on textile machinery in Asia. In this exhibition, textile machinery technology from Italy will still play an important role, presenting more innovative and sustainable new solutions.During the exhibition, more than 130 exhibitors from Italy appeared together at the 2018 Asia International Textile Machinery Exhibition and China Shanghai International Textile Machinery Exhibition. Among them, 63 Italian manufacturing companies will showcase their latest scientific and technological achievements in the exhibition under the organization of national industry organizations such as ACIMIT and ICE-Agency. In this exhibition, the Italian company's booth occupied an area of about 6,300 square meters, making it the core exhibitor of this exhibition.Asia and China are key markets for Italian textile machinery manufacturers overseas. In the first half of 2018, 46% of Italian textile machinery products were exported to the Asian market, compared with 37% and 12% respectively for exports to Europe and the Americas. In addition, the Chinese market is also a major destination for Italian exports, accounting for 16% of total exports. In the first six months of 2018, Italy's total export value reached 156 million euros (compared to 8% in the first half of 2017). Other major exporters of Italian textile machinery manufacturers in Asia include India, Bangladesh and Pakistan.The demand for textile machinery in the Chinese market is mainly concentrated in high-tech products, through technology to achieve cost optimization and environmental sustainability. The Chinese textile industry has a strong interest in innovative solutions that often respond quickly to market demands; such as fast delivery times and real-time production. In order to enhance the competitiveness of Chinese textile companies on a global scale, like other countries, Chinese companies must focus on the digitization of production processes and incorporate sustainability when adopting technological solutions.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

Advanced textile machinery equipment is inefficient? The reason is here... 2018/10/24

At present, China's textile mills and textile machinery factories are in a critical period of transformation and upgrading. In just a few years, through the introduction, digestion, absorption and absorption of new equipment, new processes, new materials, new technologies and new information. Innovation, a large number of new mechatronic high-performance textile equipment was introduced into the textile factory.However, it is undeniable that there are some contradictions and problems in the management of textile machinery equipment in the process of introducing new equipment. Only by confronting and solving these problems and dealing with the relationship between management and technology before and after the introduction of new equipment can advanced equipment play its real role in production.First of allIt is necessary to deal with the relationship between the streamlining of personnel in the reform process and the quality of maintenance equipment.In recent years, due to changes in the overall industrial structure, especially the cost of labor has increased substantially, and the demographic dividend has gradually disappeared. It is imperative to reduce the use of labor in the textile industry, and advocate a multi-functional and multi-functional talent to become the first choice for enterprise reform.What is worrying is that many SMEs have problems of blindly reducing people:First, the actual project and maintenance of the equipment are not based on the actual maintenance and maintenance of the equipment, resulting in the lack of maintenance, non-standard, non-uniform;Second, the workers did not undergo any training, from direct work of single process skills to multi-process skills;The third is to compress or even cancel the equipment management organization and management personnel, or to integrate their work functions into other departments;Fourth, the serious loss of professional equipment and maintenance personnel and equipment professional technicians in some enterprises has become a prominent problem.These problems will inevitably lead to a disconnect between the management layer and the operation layer, and the equipment management work can only be in the form.SecondTo deal with the relationship between the original design of the textile machinery and the seamless connection of the plant, the following points should be made.First, don't arbitrarily change the original design of the machinery factory. Some small and medium-sized enterprises often do not demonstrate the technical transformation and renewal, arbitrarily change the original design requirements of the machinery factory, and ultimately the overall performance of the equipment can not be played.Second, scientific planning should be carried out for the purchase of equipment according to their own needs. Many bosses are aware of the popularity of a certain product, immediately purchase a large number of equipment, and even immediately import equipment, without considering that this may be a short-term phenomenon and the utilization of equipment, eventually causing the machine to idle. Enterprises should correctly predict the market use prospects of imported machinery and equipment, and scientifically formulate development plans and acquisition plans for machinery and equipment.AgainIt is necessary to deal with the relationship between intelligent integrated equipment and modern management systems for equipment maintenance.There are often three problems in the enterprise:One is to simplify management at will. Some textile enterprises, especially small enterprises, do not start from the actual production. They lack detailed understanding of the specific conditions of the use of mechanical equipment, simplify management at will, reduce the management links, lack the scientific and effective management system for textile machinery and equipment, and lack of employees. Constraints, resulting in loose and chaotic management.Second, the system is not sound and unscientific. Although some private enterprises and private enterprises have established a system for fixing people, they have not developed a system of equipment maintenance, or they have not been scientific enough to maintain the mechanical equipment, not to mention the accounts and technical files of mechanical equipment and equipment. set up. Professional maintenance personnel also deal with things casually without the constraints of the system. Once the equipment has problems, it is impossible to determine the specific person in charge in time, resulting in increased equipment failure and premature aging.The third is “light execution, heavy coping” in equipment management. Some enterprises are mainly making money. Once the market is hot, the use, maintenance cycle and system of the equipment will be changed at will, which will bring many adverse effects to the management and equipment use of the enterprise.At lastIt is necessary to manage the coordination relationship between the old equipment and the new generation equipment to avoid the following phenomena.First, the old and new equipment are inconsistent. Inconsistent combinations of old and new equipment usually have two phenomena: the former spinning equipment is the old equipment in the 1990s, the rear spinning equipment is the new equipment in the 21st century; the front spinning is the new equipment in the 21st century, and the rear spinning is the old spinning frame. The former is because of the quality of the semi-finished products, even if the spinning machine is advanced, it can not produce high-quality yarn. Although the latter has good semi-product quality, the production efficiency of the spinning frame is greatly reduced, and the quality is still not up. Both of the above phenomena cause a huge waste of equipment performance.Second, do not repair and replace according to the requirements of the machinery factory. Some enterprises have changed their old equipment parts and equipment to a new generation of high-speed equipment due to insufficient understanding of new technologies, delaying the replacement of parts and equipment that have been seriously worn out, or purchasing low-speed parts and counterfeit and shoddy products instead of using them, resulting in production efficiency. The decline, the quality is not guaranteed.Third, the use of a new generation of equipment but the old equipment to refuel. Adding oil is the "key event" in which the equipment is well maintained and maintained in good condition for a long time. Some manufacturers use the price of imported grease is too high, there is no systematic consideration of the use of grease droplets, viscosity, volatility, life, etc., the replacement of other oils often lead to serious wear and tear of equipment components. In addition, due to improper refueling methods, the serious consequences of erroneous operations such as indiscriminate disassembly of bearings are everywhere, and losses are more than worth the loss.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

New technology accelerates the pace of intelligence, consistency makes product quality better 2018/10/8

At present, textile machinery enterprises keep up with the efficiency, cost reduction, green environmental protection and intelligent market demand, and have made a lot of efforts in equipment technology innovation - from the single machine transformation to improve unit production efficiency to the complete set of continuous production. Equipment technology innovation, relying on current automation, intelligent, networked resources and mobile Internet technology.At the same time, reducing the production costs of the textile industry is also becoming an important direction for textile machinery technology innovation. For example, the spinning machine with automatic doffing function has maintained a certain scale of growth, which not only reduces the employment of textile enterprises, but also improves the product quality, and the overall product cost is also reduced. In addition, relying on product technologies such as automatic doffing trolleys to transform and upgrade traditional old equipment has also largely solved the related needs of some textile enterprises.Through new technologies and new applications, the intermediate links of production are more effectively and closely connected, and the consistency and interchangeability of components are improved, so that more and better products can be produced in a unit time, and it is becoming a few years in the future. A major direction in the development of the textile machinery industry. These trends and new features are also reflected in this year's China International Textile Machinery Exhibition and ITMA Asia Exhibition.New technology is closely linked to the intermediate linkThe development of automation and intelligent technology has made it possible to further continually implement equipment. The combination of new technologies and new applications provides technical support for the development of short processes.At the China International Textile Machinery Exhibition and ITMA Asia Exhibition in 2018, Tianjin Fuyi will exhibit new production line equipment configuration, including automated core production line, mattress automation production line, duvet automation solution and 5-in-1 computer embroidery machine. . The level of automation and continuation of these devices has been further enhanced.The level of intelligence has received more and more attention and praise from customers. Zhou Guoxiang, chairman of Jiangsu Kaigong, clearly felt the explosive growth demand of smart combing. He said that in the past, new products were developed, and it is difficult to find a test factory. Now, the smart comber has not been off the assembly line, and many companies have rushed over to rush to try it out. Why is the smart comber suddenly recognized by our customers?These devices have firmly grasped the new market demand of our customers, that is, they have released people from the heavy manual labor and replaced the old, cumbersome and heavy labor with machines. At the China International Textile Machinery Exhibition and ITMA Asia Exhibition ITMA ASIA + CITME 2018 Textile Machinery Exhibition, the company will showcase a number of industry-leading products, including the automatic conveyor system of the comber, before the winder and comber The middle links of the terminal are connected.Improve component consistency interchangeabilityStability and reliability are short plates of domestic equipment, and improving the consistency of parts helps to improve the stability and reliability of the equipment. In addition, improving the consistency and interchangeability of equipment components is also conducive to the modular production of equipment and the intelligent level of equipment.In recent years, domestically produced equipment has achieved certain effects in this respect. For example, by improving the assembly quality, it is possible to reduce the frequency of early failures of the product, shorten the running-in period, and ensure the reliability management of the product. In response to these circumstances, under the premise of intensifying the control of core technology, the textile machinery enterprises have dig deep into the assembly precision, performance test test, assembly process specification, assembly standardization operation potential of key components of the new high-grade textile machinery and achieved some effects.For example, Yichang Textile Machinery increased research and development investment, developed a new high-efficiency K3501BC energy-saving straightening machine, K3502A high-speed large-volume carpet machine, F series single-motor independent yarn feeding, segmented modular design of the new glass bowl machine, fully satisfied The need for yarn twisting in various fields meets the requirements of energy saving and environmental protection. At the 2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition, the company will exhibit the newly developed high-speed double-twisting machine, which will increase the line speed of the equipment and greatly improve the production efficiency on the basis of the original double-twisting machine.At this year's show, Jingwei Jintian Company will launch the ZAX-GSi (MASTER) upgraded version of the air jet loom, which uses the original technology of Tsudakoma and incorporates China's rational production system to create a high-quality air jet loom. , automated, intelligent, low-cost weaving. It strengthens the automatic setting function and the simple setting function, making various setting items more specific and simple, ensuring the running reliability of the loom, as long as a few items are input, the control conditions required for weaving are The settings are automatically set and the mechanical adjustment recommended settings are displayed.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

The 19th International Textile Machinery Exhibition (ITMA 2023) will be held in Italy 2018/9/10

The European Textile Machinery Manufacturers Association (CEMATEX) announced at the CEMATEX General Assembly that the 19th International Textile Machinery Exhibition (ITMA 2023) will return to Milan, Italy, on June 8-14, 2023 at the Milan International Exhibition Center.CEMATEX Chairman Fritz P Mayer explained: “We have received very positive feedback from ITMA 2015 exhibitors and visitors. Milan has an excellent infrastructure to host major exhibitions such as ITMA, with an exhibition area of over 200,000 m2, attracting A global audience. At the same time, it has a wide range of hospitality services and air services to all over the world, as well as large-scale textile machinery and textile manufacturing.” Alessandro Zucchi, Chairman of the Italian Textile Machinery Manufacturers Association (ACIMIT) said: “We are very happy. Milan was chosen as the host of ITMA 2023. We will work with government agencies, local partners and other parties to ensure that another successful exhibition is presented."The Milan International Exhibition Center, which hosted ITMA 2015, defeated two other short-listed bidders in the list of the first nine candidates, and won the bid. Mr. Fabrizio Curci, CEO of Milan International Exhibition Center said: “The top international textile machinery and textile and apparel technology exhibitions can return to Italy, we are very happy. The organizers trust us to provide professional and high quality for international activities at the Milan International Exhibition Center. Affirmation of service."ITMA is the world's largest textile and apparel technology exhibition, held every four years since 1951. ITMA 2019 will be held from June 20-26, 2019 at the International Exhibition Center in Barcelona, Spain. At present, the booth of ITMA 2019 has been warned, attracting more than 1,600 exhibitors, and will showcase the latest technologies and sustainable solutions for the entire textile and apparel industry value chain as well as fibers, yarns and fabrics.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

Polypropylene spinning machine factory reveals the advanced course of the workplace, you still have these 4 kinds of abilities! 2018/8/31

Survival in the workplace is actually much more difficult than the survival of the wilderness of Baye. Today, Xiao Bian recommended 4 strokes for the advanced survival of the workplace, teach you to refuse to be cannon fodder, to achieve the workplace!1, the ability to survive in the workplace level 1: solve the problemOne mistake that many people in the workplace make is: love to ask questions but never solve problems.For example: the company has a new employee, good ability, and all kinds of skills are also full marks. But after a month, he was fired.The reason is that every time he meets, he will ask a lot of questions on the project and ask him what solution he has. He will wave his hand and say no.This makes the project leader more troublesome. Maybe the project is a problem, but you don't say the solution, what is the meaning of the question?In fact, it is a good thing to take the initiative to find problems in your work and dare to raise them. However, no one wants to listen to you, complaining endlessly about the problem, but never mentioning a solution.Therefore, the workplace is not a neighborhood committee. As an employee, when encountering problems at work, the first thing to do is not to reflect the problem, but to solve the problem.Strong people are better at dealing with problems than finding problems.2, the second level of survival in the workplace: summary summaryIf you have mastered the first-level ability and have been able to deal with the problem quickly, then congratulations, now you need to learn the second-level ability: resumption and summary.The ancient Greek philosopher Heraclitus once said: People cannot step into the same river twice.There are a lot of pits in the workplace, often walking along the pit, it is inevitable not to fall. However, it is important to note that it is not terrible to occasionally fall into a pit or two, but if you fall into the same pit, you will need to repeat and summarize.Once there was an industry who shared her experience, she opened her own desktop and showed us a folder called "Replica". Open this folder is a summary of every planning and copywriting that she has done in the past 7 years. The file names are the name of the copy + the complex.She said that many people say that the process of doing things is very important, but I think it is more important to do the process of resuming things.The reorganization is to sort out the ideas and find out the reasons for the pits. The summary is to confirm the plan and prevent it from falling into the same pit.3, the ability to survive in the workplace three levels: resistance to stressIn the past, many people yearned to go to big companies. They felt that big companies have good welfare, good wages, a lot of people to contact, and a lot of things to learn.However, many people nowadays are yearning for a startup company, able to grow with the company, and the startup company has flexible working hours and an attractive bonus system.But now there is a general phenomenon. Why do people who work in big companies or startups do not last long?Because they have poor resistance to stress.There is a saying that I think is right. When the pressure is greatest, it is often the fastest time for you to grow up. After the stressful period, you will find that you will become different from the past.The happiness you have gained at this time is that no happiness can match.Therefore, in the workplace, the ability to withstand stress is also necessary.The strength of a person's ability to withstand pressure determines his growth rate in the workplace. If you say up early, then all the opportunities in the workplace will give you a give up.4, the ability to survive in the workplace four levels: continuous learningIf you have the above three levels of ability, then congratulations, you need to learn the last and most important ability: continuous learning.Many people think that if you find a job after graduation, you can not learn at all. But in fact, this is precisely the biggest misunderstanding of the workplace.Because, when you are not working hard, others have slowly surpassed you.Especially in industries with strong professionalism, policies and regulations are changing all the time. If you don't maintain the ability to continue learning, your professional ability will plummet after a long period of time, and finally be eliminated by the industry, or always stay in place.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

In 2018, the "China Textile Industry Patent Award" proposed a list of awards, and many textile machinery enterprises were selected. 2018/8/31

Letter on the publication of the "China Textile Industry Patent Award" in 2018The review of the China Textile Industry Patent Awards in 2018 has ended. According to the "China Textile Industry Patent Awards Selection Method", the 2018 China Textile Industry Patent Awards will be announced.Among them, Saite Global Machinery (Qingdao) Co., Ltd., Qingdao Global Group Co., Ltd. automatic yarn bagging device, a high-temperature carbonization furnace of Jiangsu Yingyou Textile Machinery Co., Ltd. entered the gold medal publicity list.A fine-denier twin-cone forming and winding device and winding method of Beijing Jingwei Textile Machinery New Technology Co., Ltd., filament drawing and winding device of Beijing Zhongli Machine Engineering Technology Co., Ltd., Qingdao Dongjia Textile Machinery ( Group's new semi-worsted special equipment, Zhengzhou Hongda New Textile Machinery Co., Ltd., Zhengzhou Textile Machinery Co., Ltd., a cotton picker mechanism for reciprocating cotton pickers, and a type of Hengtian Heavy Industry Co., Ltd. Axis dyeing and sizing machine for yarn sizing sizing, pneumatic splicing device for looms of Shandong Rifa Textile Machinery Co., Ltd., cotton roller for cotton spinning comber of Jiangsu Kaigong Machinery Co., Ltd., Zhejiang Digital yarn tension controller of Rifa Textile Machinery Co., Ltd., a kind of tail yarn removal, tail yarn tube screening and air-filled tube exchange integrated device of Tianjin Hongda Textile Machinery Co., Ltd., one of Jiangyin Boluwei Machinery Co., Ltd. The double-pressure type stepless pressure regulating roller calender and the air-laid machine of Jiangsu Yingyang Non-woven Machinery Co., Ltd. entered the list of outstanding awards.Within 10 days from the date of promulgation of this announcement, any unit or individual who has objections to the announced project may submit it in writing to the Science and Technology Development Department of China Textile Industry Federation and provide necessary supporting materials. In order to facilitate verification and verification, and to ensure that the objection is handled objectively and fairly, the unit or individual who raises the objection should indicate the true identity and provide effective contact information. Where an objection is filed in the name of the unit, the official seal of the unit shall be affixed to the written objection material; if the individual files an objection, the real name shall be signed. The Science and Technology Development Department of the China National Textile and Apparel Council will protect its identity in accordance with relevant regulations. Objections that exceed the deadline are not accepted.Contact: Science and Technology Development Department of China Textile Industry Federation, No. 18, Chaoyangmen North Street, Chaoyang District, Beijing, 100020.August 24, 2018Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

The global textile digital inkjet market will grow at an average annual rate of 25% 2018/8/24

In the past one or two years, there have been a number of mergers and acquisitions in textile digital inkjet printing. In May 2015, SensientTechnologies acquired the assets of XenniaTechnology from RoyalTenCateNV. This was followed by EFI's acquisition of an aqueous ink manufacturer Reggiani Macchine in July 2015 to form EFI Reggiani. In October 2015, Dover acquired JKGroupSPA and its three ink companies – Teck, KiianDigital and Sawgrass. In June 2016, Epson Italy, a subsidiary of Epson Group, acquired a leading brand in the field of textile digital inkjet, Fratelli Robustelli S.r.l.Recently, some insiders analyzed that the global textile digital inkjet market will grow at an average annual rate of 25% by 2019. In some areas, such as short-term and fast delivery, the speed of transition from analog to digital printing is accelerating, and this growth rate will exceed the market growth rate, reaching about 30%.In recent years, the growth rate of digital printing in most fields has been double-digit, far exceeding the growth rate of traditional printing applications. Many senior industry insiders such as Mimaki EMEA regional marketing general manager Mike Horsten, the world's leading manufacturer of digital inkjet printing equipment, predict that digital inkjet printing for textiles will be one of the largest markets in the future.The textile market is gradually developing, and with the early application of silk screen in this field, printing has gradually gained a foothold in the textile market. However, it is foreseeable that the application of digital printing in the textile industry is rapidly emerging. With the advent of textile digital inkjet technology, the field of textile printing has undergone tremendous changes in recent years. Initially, digital inkjet was more suitable for proofing due to the time and cost advantages of printing preparation. Nowadays, with the universalization of personalization and the increasing number of digital inkjet efficient production equipment, digital inkjet has become more and more mainstream in the industry.“Digital inkjet technology has changed everything he touches, including the textile industry and the printing market,” said Fernando Urteaga, head of Epson America. “Textile printing is a $7.5 billion market, which brings huge business opportunities. ."Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

The "behind the scenes" that made the polypropylene spinning machine companies go bankrupt. 2018/8/24

According to relevant information, since January 1, 2018, a total of 205 companies in the textile and chemical fiber industries have been bankrupt due to non-performing assets. These bankrupt companies have a principal and interest of up to 7 billion yuan.The analysis shows that there are several major reasons for the closure of textile enterprises, mainly as follows:1, blindly fight the price warTextile companies like to fight price wars. The prices of some products are originally low, but competitors will push prices down, and quality is certainly not guaranteed.Because of price wars and vicious competition, many companies have meager profits, and they simply cannot afford technological innovation. As a result, they can only maintain market share by lowering prices, creating a vicious circle.In the context of large consumption upgrades and overcapacity, companies are still shoddy, seizing the market through low prices, and finally can only enter the dead end.2, labor costs are too highLabor costs are getting higher and higher, and many textile companies are facing 15% annual salary increase pressure, but the price of products has not improved.Most companies have reduced their employees, but they still can't resist the pressure of rising costs. The dominant and hidden forms of the labor force have risen sharply, and many textile companies are overwhelmed.3, chaos guaranteeIn the process of growing the business, the relationship between the textile business owners and the mutual help is inevitable, so there is a chain of guarantees, one glory and one loss.Banks urge companies to lend and encourage them to guarantee each other. Other local governments encourage big guarantees for local economic and employment considerations.In the context of overcapacity, when banks began to lend, they were like a fire ship, killing some companies that were still healthy.4, chaotic investmentTextile companies are not good at making money, and many companies will invest in projects that are not related to the main business. The most common is real estate. Indiscriminate investment in enterprises often puts a lot of pressure on cash flow. Once the bank draws money, the consequences are very serious.5, the transformation is not timelyThe problem of overcapacity in China's textile enterprises is generally very serious. If it is not timely transformed, it can only fail. In fact, there is still room for the transformation and upgrading of textile enterprises. For example, it can be developed in a more subdivided and more specialized field, or abandon low-margin products and focus on high-margin products.6, environmental protection is not up to standardEnvironmental supervision is becoming more and more strict. If it does not meet the standards, it needs immediate rectification and investment of a large amount of funds and resources for self-improvement.However, many companies still only choose to "see the money", focusing only on the immediate interests, while ignoring the long-term development of the enterprise, it is sooner or later to be shut down and closed down.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

The "2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition" exhibition meeting was successfully held 2018/8/17

On the afternoon of August 14th, the “2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition” was held in Hangzhou. The meeting was chaired by the Vice President of China Textile Machinery Association/Deputy General of Beijing Tiger International Exhibition Co., Ltd. Manager Gu Ping presided over the meeting. Nearly 200 people from 2018 China International Textile Machinery Exhibition exhibitors, contractors and other related units attended the meeting. The meeting focused on the exhibition situation, exhibitors and contractor's notices, exhibition technical services, exhibition logistics and transportation. Five aspects of service and intellectual property were introduced to introduce the exhibition.Liang Pengcheng, Vice President of Textile Industry Branch of China Council for the Promotion of International Trade / General Manager of Beijing Taigesite International Exhibition Co., Ltd. made a presentation report on the exhibition of the organizer, introduced the basic situation of the exhibition, the process allocation area, the dismantling time, and the audience. Introduction to the registration hall, transportation around the exhibition hall, free bus shuttle service, and the impact of the exhibition on the textile machinery exhibition.Peng Chunyan, senior manager of the National Convention and Exhibition Center (Shanghai), introduced the requirements, requirements and precautions of exhibitors and contractors, and explained the contents of the exhibition hall.Chen Long, deputy manager of Beijing Pico Exhibition Co., Ltd. introduced the TSP construction certificate handling and OPS on-site handling business, and explained that due to the influence of China International Import Expo, on-site construction safety and power safety inspections are likely to increase. Conduct political examinations for the construction workers.Wu Zhaoming, the general manager of Yunzhan Global Logistics Co., Ltd. (Shanghai), gave an OLC operation introduction report and introduced the OLC operation contents from the aspects of OLC service, transportation vehicle management, empty box storage, and North Square container/empty container stacking.Vice President Gu Ping gave a report on the IPR protection work of the exhibition, and specifically introduced the work arrangement of IPR protection at 2018. 1. Established the IP Office of the exhibition; 2. The IPR complaint handling procedure will be released on the official website of the exhibition one month in advance. Complaints, and start working one day ahead of the exhibition period; 3. All Chinese and foreign exhibitors participating in 2018 should sign the "Intellectual Property Protection Commitment" (Exhibitor Manual Table 25) to protect the interests of exhibitors. When referring to the acceptance of intellectual property rights in the exhibition for 16 years, President Gu said that the total number of complaints was the lowest in the previous exhibitions, and he also provided relevant suggestions for this year's textile machinery exhibition.The venue also arranged for the technical service providers and exhibition logistics service providers to answer questions for exhibitors and contractors on site.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

China Textile Machinery Association Spinning Machinery Branch held in 2018 2018/8/16

On August 8, the 2018 annual meeting of the Spinning Machinery Branch of China Textile Machinery Association was held in Jinzhong, Shanxi. More than 120 representatives from the national spinning machinery and equipment enterprises attended the meeting.Gu Ping, vice president of China Textile Machinery Association, analyzed the operation of the textile machinery industry in the first half of 2018 and highlighted the development of the spinning machinery market and technology. According to him, from January to June 2018, the textile machinery industry continued its growth trend since the second half of last year, and the main economic indicators maintained growth and achieved smooth operation. From January to June, the textile machinery industry achieved a main business income of 55.626 billion yuan, a year-on-year increase of 16.02%; the total profit reached 3.181 billion yuan, an increase of 19.56%.Gu Ping introduced that in 2017, the short-flow new spinning equipment was more favored by users, and the development of ring spinning machinery was relatively stable. Statistics show that the market continues to strengthen the demand for automated and continuous equipment. Whether it is new projects or renovation projects, equipment for saving labor is the first choice for spinning enterprises. According to the statistics of key textile enterprises by China Textile Machinery Association, in the first half of 2018, 2200 sets of carding machines were sold in the main products of spinning machinery, down 4.4% year-on-year; about 1,500 sets of drawframes were sold, down 16.7% year-on-year; combing Machine sales of about 380 units, a decrease of 44.1%; roving machine sales of about 750 units, an increase of 7.1%; cotton spinning machine sales of about 2.3 million spindles, a year-on-year increase of 6.5% of the collection of spinning equipment sales of about 2.62 million spindles, an increase of 21.3% The sales of rotor spinning machines was about 270,000, an increase of 17.4% year-on-year; the sales of automatic winders were about 300, which was the same as that of the same period last year.In general, cotton spinning complete sets of equipment continue to develop in the direction of high production, high speed, automation, continuous and information. At the same time, spinning equipment and component equipment companies have also intensified their innovation in combination with their own conditions and market demand. In accordance with the statistics on the patents of more than 60 enterprises mainly producing spinning equipment and special equipment, in 2017, a total of 245 patents were granted, including 97 invention patents, 140 utility model patents and 8 appearance patents. Although the total number of patents has decreased compared with 2016, the number of invention patents has increased significantly.Opening up the international market has become an important development direction for China's textile machinery enterprises. Liu Bin, General Manager of the Operation and Management Department of China Textile Foreign Economic Cooperation Co., Ltd. analyzed the current status of the international market for spinning machinery.At present, the annual demand for cotton spinning equipment in India is about 2 million spindles, of which about 1 million spindles are added. India's industrial system is relatively complete, and the locally manufactured spinning equipment has a very strong market adaptability and competitiveness. Liu Bin believes that China's textile machinery enterprises have great opportunities in the Indian market, and the challenges are also great. The success depends mainly on the product quality, market strategy and service level of the company.Vietnam has become the largest source of Chinese cotton yarn imports. As of 2017, Vietnam has a total of 8 million spindles. In the last 3 to 5 years, Vietnam has increased its spindles by 15% to 20% annually. The goal is to increase the number of spindles to 10 million spindles by 2020. In the past 10 years, Chinese companies have exported 3 million spindles of spinning equipment to the Vietnamese market. At present, China's equipment accounts for about 70% of the Vietnamese market.In recent years, the market share of Indian LMW equipment in the Bangladesh market has grown by leaps and bounds. Liu Bin believes that this is mainly because Bangladesh is bordered by India, and many Indian textile technicians are gradually infiltrating into Bangladeshi textile mills. In response to this problem, the expansion of local service teams and professional training have become the top priority for Chinese textile machinery enterprises. It is necessary to make great efforts to implement it.Liu Bin believes that textile machinery enterprises need to carry out product research and development according to the needs of users in various market segments, consider how to use technology advantages to guide customers, how to use financing to support against risks, reduce costs, and accurately target potential customers with precise marketing, how to improve service levels. .Close communication between upstream and downstream companies has become an important aspect of promoting the advancement of textile machinery. Zhang Jianxiang, deputy general manager of Lutai Textile Co., Ltd. introduced Lu Tai's experience in the selection of spinning equipment and shared his thoughts and understanding on the layout of textile machinery and internationalization. According to reports, the selection of Lutai spinning equipment begins with the company's product positioning, product structure and quality requirements. Lutai products are positioned in the international high-end market. At present, the imported equipment from Germany, Switzerland, Japan and other countries are mainly used, and some domestic spinning equipments are used.The new era has provided new opportunities for China's textile machinery industry, but at the same time it must face up to its own gap. Zhang Jianxiang suggested that textile machinery enterprises, first, must have confidence, full of enthusiasm, but also have a calm and mature attitude, seek truth from facts, and focus on innovation in technology. Second, upgrading from manufacturing to manufacturing services. Textile machinery enterprises should extend downstream, set up expert teams for different needs of customers, provide professional customized services, and provide customers with overall solutions and personalized design. Third, see the market and do mainstream development. Fourth, look at the direction and seize the opportunity to go out. Fifth, the development of design centers in the international metropolis is a trend. Sixth, the establishment of an assembly plant with core technology. According to Lu Tai’s experience of going out, Zhang Jianxiang believes that it is an inevitable trend for big companies to go out. Going out can not only reduce production costs, but also reduce barriers to trade barriers. More importantly, it is necessary to achieve international development of enterprises and obtain a larger market.The representatives of the participating companies also discussed and exchanged on the market development and future development direction of spinning machinery and how to regulate the competition in the industry.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......